ADKA Fittings are tested and confirm to the requirements of BS / EN standard (Class A & B complying with Saudi Aramco requirements.

Double Coupler D/F EN 74-1B
Weight | 0.960 Kg (960gm) |
---|---|
Finish | Galvanized |
Type of Load | Slip along a tube |
Minimum Slip Load | 10 KN |
Maximum Slip Load | 15 KN |
Maximum Distortion | 32 KN |
Safe Working Load | 9.4 KN |
Maximum Tension Load | 18.80 KN |

Swivel Coupler D/F EN 74-1A
Weight | 1.10 Kg |
---|---|
Finish | Galvanized |
Type of Load | Slip along a tube |
Maximum Slip Load | 09.50 KN |
Maximum Distortion | 19.00 KN |
Safe Working Load | 5.30 KN |

Single (Putlog) Coupler D/F BS1139
Weight | 0.630 Kg (630 gm) |
---|---|
Finish | Galvanized |
Type of Load | Force full the tube axially out of the coupler |
Maximum Slip Load | 1.60 KN |
Safe Working Load | 0.53 KN |

Girder Coupler/Beam Clamp D/F AS1576 Use in Toe Board Clamp pairs (In accordance with BS1139 Part 2 1982)
Weight | 1.50 Kg |
---|---|
Finish | Galvanized |
Maximum Distortion Load Vertical | 32.00 KN |
Maximum Distortion Load Horizontal | 11.50 KN |
Maximum Slip Load | 06.00 KN |
Minimum Load bearing Capacity | 10.00 KN |

Joint Pin (Pressed)
Weight | 0.84 Kg |
---|---|
Maximum Slip Load | 6.00 KN |
Maximum Tensile Load | 7.80 KN |
Maximum Bending Load | 19.00 KN |
Finish | Plated, Gold Passivated or Powder Coated |

Sleeve Coupler Pressed EN 74-1B (In accordance with BS1139 Part 2 Sec 2.1 1991/EN74 1988)
Weight | 1.00 Kg |
---|---|
Finish | Galvanized |
Maximum Tensile Load | 7.80 KN |
Maximum Bend Load | 21.00KN |
Maximum Displacement | 5.00mm |
Maximum Load Bearing Capacity | 19.00 KN |

Ladder Clamp Pressed
This is a unique safety product that enables a ladder to be firmly Fastened by the stiles to horizontal scaffold tubes or posts. Used in pairs

Staircase Coupler Pressed
The stair case coupler is used for the construction of make shift stairways by connecting together scaffold tubes and timbers (often scaffold boards) in angles varying from 28°to 90°. These units can be used in either left of right hand combination.

Toe Board Clamp
Weight | 0.32 Kg |
---|---|
Finish | Galvanized |

Board Retaining Clamp
- Conforms to BS EN 1139: Section 2.2. 1991
- Silver or gold zinc plated finish
- Used for securing scaffold boards
The board retaining clamp is used to secure scaffolding boards. Board retaining clamps ensures that scaffolding boards are carefully and safely locked in to the correct position for a safe work environment.
Get in touch with us today
At Adka General Contracting Co. LLC., we turn visions into reality. With a focus on quality, innovation, and client satisfaction, we're your trusted partner in building the future. Contact us to create extraordinary spaces together.